Forestall Exact Equipment Co.,Ltd.

manufacture(1)

Forestall Exact Equipment Co.,Ltd.

Showing 1 - 10 of 14, total 2 pages [First] [Previous] [Next] [Last]

new bga rework station rd550
Specification: 630mmL*570mmW*500mmH
Detail: 1. The machine vision system with CCD on the BGAs solder ball back in the melting process of observation. 2. Intelligent heating wire, the fan does not turn, the hot wire is not powered. 3. Com interfaces, and computer conn...

rd5860 bga rework station
Specification: 600mmL X 600mmW X 500mmH
Detail: 1.Intelligent thermal fuse, it doesnt work when fan no working. 2.Three independent heating zone, suitable for lead free process 3.It adapts quality heating material in 1st and 2nd heating zone, which produces hi temperature...

rd650s bga rework station
Specification: 700mmL*690mmW*650mmH
Detail: 1. volume is small, the weight is light. Didn't need spirit to circumscribe to compress spirit. Needing the 220 V power supply can work. 2. The mold piece turns a design, take,maintain all very convenient. 3. The function is...

rd300 bga rework station
Specification: 760mmL*700mmW*600mmH
Detail: * Three independent heating zones, suit for the non-lead system process. * Upside heating zone and the base heating zone use finely heating material to produces the high temperature breeze. The welding effect surpasses th...

rd5020 bga rework station
Specification: 880mmL*890mmW*880mmH
Detail: HEATING SYSTEM There are three Heater Sections in the RD-5020 and RD-5020S Systems. Two are hot air type to accurately heat the target component and circuit board from the top and bottom. The third is an area heater and ...

rd5030 bga rework station
Specification: 800mmL*960mmW*880mmH
Detail: * Optical system uses a special prisms with high-precision auto focus CCD. Allows the user to the BGA (CSP) chip at the bottom of the solder balls and PCB Board of BGA (CSP) pads 2 image duplications, through the suction nozz...

ir380 bga rework station
Specification: 380mmL*420mmW
Detail: * Three independent heating zones, multitude temperature zones control, lead free process. * Top heating zone use to infrared * The bottom of BGA applies to quality heating material to produce high slight wind. Weld...

rd280a bga rework station
Specification: 600mmL*550mmW*600mmH
Detail: 1. Intelligent heating, fan untrasfer,heating is not powered on. 2. Instrument control,and three independent heating zone,suitable for lead- free process. 3. The first heating zone, the second heating zone heater uses fi...

ir5020 bga rwork station
Specification: 880mmL*890mmW*880mmH
Detail: 1.IC size min 1mm. 2.Windows XP system, multil-language interface, operation easy with functinal software. 3. Aut-operation. Heating suction and sucker working are controlled by computer. 4. welding,mounting and countpoint ...

rd430 bga rework station
Specification: 600mmL*550mmW*600mmH
Detail: 1. Intelligent heating,when fan untrasfer,heating is not powered on. 2. Top heating zone and bottom heating zone use finely heating material to produce high breeze. Welding is better than BGA bottom which only have infra...


Showing 1 - 10 of 14, total 2 pages [First] [Previous] [Next] [Last]
1 2